Wines Im Making: Harvest 2019

We picked our grapes this year on Saturday, October 5, which is a pretty typical date. We usually harvest in the first week of October. We took in 77.42 pounds of Sangiovese and 155.54 pounds of Cabernet Sauvignon/Cabernet Franc, which is rather more than usual because this year we suffered very little damage from raccoons and other critters, losing only seven or eight clusters of low-hanging fruit, and losing virtually nothing to mildew--a first. It made a huge difference to dust the grapes with sulfur rather than spraying them. It is a far easier method and it works much better. That will be the plan in the future. These are perhaps the healthiest-looking grapes we've ever harvested.

The Cabernet must tested at 23.25 brix and a pH of 3.38, which is close to ideal. The Sangiovese tested at 20.25 brix and a pH of 3.7, a trifle low on the brix side, but we usually make rosé from these grapes, so that's well within the range I'm looking for. I added 230 grams of corn sugar to bump up the brix about a degree, as I did last year. After 18 hours on the skins, I pressed the grapes, (the grapes were crushed at about 4PM on the 5th, pressed at about noon on the 6th). Ten gallons of must yielded five gallons of pressed juice. On the evening of the 6th, I added yeast, this year using the Prise de Mousse variety again, as I did last year, although I've usually used the Epernay II yeast in the past. The yeast doesn't seem to alter the flavor that much. I've had good results with both. The grapes were so healthy looking I did not add sulfite to the Sangiovese must. I lightly sulfited the Cabernet, as that must will soak for a couple of days before it starts to undergo fermentation. So far, off to a good start. Next task--bottle and label last year's wine.

Wines I'm Making: 2015 Grape Harvest

I picked our grapes this year on September 19, which is about three weeks earlier than usual (although only five days earlier than last year, which was likewise early). Because of the heat and dry conditions, many grapes were already beginning to turn to raisins. Fruit set was also very poor this year--the worst it's ever been. The harvest was tiny. I took in only 18.7kg or 41.4lbs of Cabernet and 12.8kg or 28.2lbs of Sangiovese. We normally harvest anywhere from two to three times that much. The crushed cabernet must measured 26.0 Brix at a pH of 3.62 (pH squared times Brix = 340.7). The crushed Sangiovese must measured 22.0 Brix at a pH of 3.57 (pH squared times Brix = 280.4). I usually aim for a Brix reading of about 25 for the Cabernet and about 23 for the Sangiovese. I lightly sulfited both containers and set them aside in a cool place for a pre-soak.

I inoculated the juice on the morning of the third day, September 22, using the Rockpile yeast for both. Ordinarily, I press the Sangiovese after about 18 hours to make a rosé, but we had so little fruit and because of work conflicts, I had to leave it longer than that, so, by default,  I'm fermenting the Sangiovese as a red wine this year for the first time in many years. I'm trying to decide whether to blend the two varieties. I may have no choice. I ended up with only about three gallons of each, which, when pressed, will reduce to about two gallons each. That would require using four one-gallon containers, which is a pain (no one seems to make two-gallon glass containers suitable for handling wine), so it will be easier to combine them.

So, fermentation is under way. I'm also doing a hard cider fermentation at the moment. More soon.

[Update: In the end, I decided to leave the two red wines unblended for the time being. As of today (October 6), the wines are resting, awaiting inoculation for malolactic fermentation.]